Intro of drifting fish feed making equipment

In order to  lower the feed cost and fish diseases in  tank farming  ranches, Richi Machinery  has actually  introduced a  drifting fish feed making  maker; the fish pellet feed  created by the fish feed pellet extruder can  efficiently  protect against  and also control fish diseases.

Related post: floating fish feed machine

1.  Use  drifting fish feed making  equipment

Fish feed pellet machine is  commonly used in large, medium  as well as  tiny aquaculture, grain feed processing plants, livestock farms,  fowl  ranches,  private farmers and  little  as well as medium-sized  ranches, farmers or large, medium and small floating fish feed  assembly line.

2. Precautions when  utilizing  drifting fish feed making  device

① When the fingerlings are  equipped, when the water temperature is low, the growth is slow,  as well as the  dimension is  little, the pellet  size of the feed  must be  regulated at  regarding 2mm; when the  temperature level  climbs  as well as the  development of fingerlings is  increased, the  size of the feed pellets in the mid-term  need to be 3-3 .5 mm,  and also later in 4-4 .5 mm.

Related post: Fish Feed Production Line In Iran

Therefore, when using the  drifting fish feed making  maker to  procedure fish pellet feed, the  dimension of the feed pellets should be  changed according to  various periods to  attain the best feeding  impact.

②  Due to the fact that the fish has no  tummy, the feed stays in the intestinal tract for a  extremely short time,  and also the  food digestion  as well as  use rate is not high; therefore, when feeding the feed, it  ought to be fed  a number of times,  and also each feeding  ought to be a little less feed  application.

③ Fish pellet feed  consists of 12% - 14% of water during the floating fish feed making  maker production  procedure,  as well as it is  hard to  keep for  also long, so as to avoid deliquescence,  mold,  and also  illness after feeding the fingerlings, so it is best to  create  and also feed it at the same time.

④ In order to  far better  stop the  launch of  infected fish fingerlings, adding 1% salt to the feed powder before production can  properly prevent the occurrence of  illness of fingerlings.

Related post: animal feed manufacturing plant cost

3. Performance of  drifting fish feed making machine

Scientific  and also  sensible structural design,  straightforward,  tiny footprint  and also  reduced noise.

 Tiny floating fish feed making  device for  completely dry in  and also  dry, easy to make materials, high  outcome  and also low energy consumption.

This floating fish feed making machine has a high pellet  creating rate,  as well as the resulting pellets have high  solidity  as well as smooth  surface area, which is convenient for storage  and also  transport.

This  design floating fish feed making  equipment is  geared up with Ø1 .5-- Ø20  type of aperture  mold and mildews, which are suitable for granulation of  various  products  as well as  attain  much better  outcomes.

 Adjust to different materials to ensure the pressing  result.

Simple  procedure  and also maintenance, safe and  reputable

Strong adaptability to the workplace

The floating fish pellet  maker body is cast  all at once, the  framework is firm  and also the appearance is  attractive,  and also the service life is long.

Related post: twin screw extruder for sale

4.  Benefits of RICHI floating fish pellet machine

1) Uniform discharge, smooth pellets, and output  boosted by 50%.

2) The  generated granules by floating fish feed making  maker are  created at one time, with high  firmness, smooth  surface area and sufficient  interior ripening, which can improve the digestion  as well as absorption of nutrients. Better for storage.

3) The floating fish feed making  equipment has humanized  layout,  tiny  impact, low noise,  emergency situation  switch, simple  as well as safer operation.

4) RICHI  drifting fish food machine can be customized according to customer  requirements.

5) RICHI floating fish feed making  equipment belongs to the  manufacturing facility  straight sales, there is no middleman, the  cost is cheap, the profit is low,  and also it is all installed  as well as debugged  prior to  shipment,  and afterwards  loaded  as well as shipped.

6) RICHI  drifting feed making  maker is  crammed in plastic (plastic waterproof) before  distribution.

7) Before the  last  shipment, the floating fish feed pellet making  device is  placed on all-wood  product packaging,  and also  the entire machine is  crammed in a wooden box to ensure that the  drifting pellet  device reaches the  location  securely  as well as without damage.

Related post: tofu cat litter factory

5.  Refine composition of floating fish feed extruder:

1) Mixing  device:  Include a certain proportion of water to the raw  products, such as corn flour, rice flour, soybean flour, fish meal, meat  dish, grain flour, additives,  and so on,  and also mix them  equally.

2) Feeder: Using the  electric motor as the power for screw  communicating, the  blended raw materials are transported to the feeding  receptacle of the  drifting fish feed extruder  device to  guarantee  practical  as well as  quick feeding.

3) Twin-screw  drifting fish feed extruder: In the case of  heat  as well as high pressure  setting  and also screw extrusion, the  mold and mildew can be  changed by  readjusting the process to  generate different feeds,  as well as the  certain pellet  shapes and size can be  altered.

4) Conveyor: to  move the feed to the oven.

5) Multi-layer  stove: Most of the  stoves are  electrical  stoves, the  temperature level is adjusted between 0-200 degrees through the control  closet,  as well as the  inside is a  stainless-steel double-layer mesh bag, which  lowers the moisture of feed pellets, promotes the  healing  price,  and also increases the  service life.

6)  Flavoring line: The oil sprayer sprays oil, food attractant,  and so on. The  flavoring drum  consists of octagonal drum, cylinder,  raising  solitary drum, and  dual drum  flavoring line. According to the  result and product properties, the oil is sprayed  externally of the feed,  as well as sprayed at the same time. Minced meat  as well as spices,  spray  equally.

7)  Air conditioning  as well as  communicating:  lower the temperature of frying  as well as feed, promote the solidification of oil,  lower the temperature of pellets,  and also facilitate packaging.

8) Vibrating sieve: sieve off excess external  product  as well as pellets at the end of the year to  make sure the quality and the reuse of  resources.

9) Packaging  equipment:  hand-operated sealing  maker and  automated  product packaging  device can be used.

Related post: https://www.richipelletmachine.com/floating-fish-feed-making-machine/

6.  Concerns  concerning floating fish feed making  equipment

（ 1 ） Q: Which is  the most effective  tiny floating fish feed making  maker?

 Response:  Presently, there are  lots of  makers of small  drifting fish feed pellet  equipments, which are mixed. In order to avoid  acquiring  devices with  low quality,  customers  must  pick  routine manufacturers to buy them.

A  specialist  drifting fish feed making  device  maker  ought to have the  complying with three points:

A regular floating pellet machine manufacturer.

 Superb machine  high quality,

Perfect after-sales service.

（ 2 ） Q: Is the small  drifting fish feed making  device  sturdy?  just how much is it?

 Solution: You  need to  recognize with the  tiny  drifting pellet  maker. What is the  impact of this  equipment? Is it easy to use? This floating fish feed making  maker is a feed processing  tools  specifically designed for  reproducing  chicken.

The compound feed formula has a  selection of raw materials. Nutritional  equilibrium.

Reduce  illness and improve survival rate.

 Conserve feed  expense for  dog breeders  and also  enhance economic  advantages. The  particular price  needs the user to  establish the  design  initially,  and after that  allow the floating pellet  device  supplier quote.

（ 3 ） Q: How much is the  cost of the small  drifting feed extruder  maker?

Answer: The  crucial  variable for the price of the  little floating feed extruder  equipment lies in the output,  resources  and also power. The higher the  outcome, the higher the  rate of the corresponding floating fish feed making  equipment, and the greater the power, the higher the price.

 For that reason,  prior to purchasing,  initial  choose how much output you want,  and afterwards let the floating fish feed making machine  maker  offer an  exact  quote.

（ 4 ） Q:  Just how much is the  little fish feed pellet  maker?

A: The power of the  little floating fish feed making  equipment is 2.2 kw with two-phase  electrical power, and the hourly  result of feed pellets is about 60-100  kilos. The price of a  top quality  equipment with a motor  has to do with 2000-200000USD.

（ 5 ） Q: What is floating feed  maker  cost?

 Response: Thefloating fish feed pellet mill is a multi-functional feed pellet  equipment, which can be used to process  pet feeds such as  poultries, ducks, and geese,  boost the survival  price. The  cost is 2000-200000USD.

For details please contact: Richi Pellet Machine

WhatsApp：86 138 3838 9622

Email：enquiry@richipelletmachine.com