Main features of marine drifting feed equipment
Today, aquatic floating feed device technology is preferred in the manufacturing of aquafeeds, as it can be utilized to generate a range of feeds, whether drifting or sinking, depending on the requirements of each species. Furthermore, the extruded feed made by marine floating feed maker has less contamination and also high efficiency, assisting to enhance digestibility.
Throughout the marine floating feed device extrusion procedure, mechanisms such as temperature, humidity, pressure will boost starch gelatinization, break down and soften the cell wall as well as launch some quickly digestible compounds, therefore promoting the food digestion and absorption of farmed pets.
Related post: Floating Fish Feed Mill
Via water drifting feed machine extrusion modern technology, it is feasible to prevent particular protease preventions (such as antitrypsin), destroy pathogens in basic materials or adjustment healthy protein homes to additional enhance the contact with enzymes in fish and shrimp, aiding to absorb food extra quickly.
Extruded feed made by water drifting feed device can control the material of compounds and also help better detoxification. At the same time, the longer stabilization time in the water (12-36 hours) helps farmers to observe and also control the feeding timetable.
Although extruded feed made by drifting fish feed making maker has noticeable benefits over pelleted feed, the preliminary financial investment price of extruded feed manufacturing is higher, resulting in higher feed costs.
However, for high-end fish farming, a growing number of individuals are taking note of the marketplace prospect of high-end fish feed.
Related post: https://www.richipelletmachine.com/floating-fish-feed-mill/
1. Highlight of water floating feed equipment.
Feeding, rotary cutting, as well as primary drive all embrace frequency conversion speed regulation system, which has strong power, stable operation, power conserving, high marine production efficiency, long lasting tools, low failing rate, as well as convenient operation and upkeep.
The screw of drifting feed equipment is made of alloy product by special process, the life span is 3-4 times longer than that of residential comparable makers, as well as the expense of producing feed is reduced; the fractional combined screw appropriates for a wide range of basic materials and even more diverse products.
Automatic lubrication system of the drifting feed maker decreases power intake and also prolongs service life.
The feeding system adopts spiral forced feeding, as well as the feeding is consistent and wide. It can be equipped with an automatic feeding system. The feeder is a screw conveying variable frequency speed control to adjust the feeding amount to manage the blowing result (quantitative feeding, and can efficiently protect against the product from curving).
Related post: Shrimp Feed Mill
Linear bearing device adjustment system, readjust the tool precisely as well as quickly.
The twin-screw of drifting feed equipment has self-cleaning feature, and making use of tools is a lot more sensible and also hassle-free.
Update the configuration of numerous equipment modern technology as well as tools to make the outcome of the twin-screw floating feed equipment larger.
Different screws and also length-diameter proportions can meet various manufacturing procedures.
Aesthetic automated temperature control system to make temperature level control much more instinctive and specifications a lot more exact.
The total floating feed maker configuration The procedure of the fish feed pellet extruder is much more instinctive and the upkeep is easier.
Dry blowing procedure adopts self-heating method without steam system, which is more in line with the real requirements of individuals.
No adhesive is required to refine the drifting feed, and it can keep security in water for more than 12 hours.
Related post: Fish Feed Production Plant
Little and also moderate equipment is specifically ideal for scientific research study organizations, unique breeding farms or tool and also tiny feed factories. There are likewise specially personalized speculative twin-screw floating feed equipments offered for scientific research study systems.
2. The distinction in between pellet feed and squeezed out feed.
With the development of the drifting fish feed processing market, two extensively used modern technologies currently utilized to produce aquafeed are pelleting as well as extrusion by drifting feed equipment. Compared to natural baits, such feeds have greater dietary web content and also stability, much less dampness, less complicated storage, fewer virus, as well as longer storage times.
Pelletizing by floating feed equipment is a technique of pressing little pellets of raw material into bigger pellets, during which humidity, temperature level and also stress can greatly affect the top quality of the feed.
One of the main benefits of pelleted feed is reduced manufacturing prices. However, it has some drawbacks.
One of the most significant negative aspects of pelleted feed is that it sinks faster as well as liquifies promptly in water (according to stats, concerning 10-15% of feed is lost), which suggests greater feed costs, lower farming profits, and also easier cause water air pollution.
Related post: floating feed extruder machine
3. Pick pellet feed or extruded feed?
Farmers, choose pellet feed or extruded feed?
When picking feed, farmers need to think about the characteristics of different marine varieties as well as feeding routines. Due to the fact that the behavior of shrimps as well as crabs is to locate food at the bottom, and after that eat the food gradually, so the food ought to not be as well hard and not quickly soluble in water.
Therefore, extruded sediment by drifting feed maker is the very best option because it is soft as well as challenging to dissolve in water, as well as it is convenient for shrimp and also crab to eat, minimizing feed waste as well as minimizing water pollution.
Specifically in extensive shrimp farming, extruded feed needs to be dominant, because it is much easier for shrimp to digest protein from extruded feed, which reduces feed waste and advertises much better protein absorption.
At the same time, we can also boost the absorption price of the feed by adding helpful microbes or boosting digestive system products to the feed.
Related post: 3-4T/H Floating Fish Feed Production Line
However, from a lasting perspective, the use of extruded feed, which is made by drifting feed machine will raise the cost, as well as if the fish use extruded feed in the mature period, it may lead to fish fat, big tummy, inadequate tension ability, not ideal for long-distance transportation, etc, causing a low price at the time of sale.
Therefore, in the process of aquaculture, when many farmers use feed, they typically utilize a combination of pellet feed and also extruded feed, which not only regulates water quality, reduces feed deposits, but likewise improves efficiency and financial benefits.
At the same time, the tank farming industry is promoting the more growth of the two feeds as a result of their corresponding advantages.
4. Installment of drifting feed maker.
( 1) Installation of floating feed device pipe shelf.
The selection of the installation position of the pipeline rack depends on the website location, yet it ought to not be also much from the major engine. Far from the main engine will trigger waste of products throughout pipe link on the one hand, and cause the hysteresis of the control system on the other hand.
If the setup place on site allows, the most effective position of the pipeline rack is to be directly behind the major engine and also conditioner, alongside the main engine, and about 1 meter far from the major engine (there is a certain maintenance area), while ensuring that the pipeline shelf is readjusted upwards. The placement of the steam line user interface of the conditioner is on the side of the conditioner.
In order to help with the cleaning of the ground and also the outflow of waste water in the future, the pipeline rack ought to be elevated by around 10 cm throughout installment. In the setup of each valve in the pipeline, the setting of the shutoff wheel need to satisfy the demands of convenient operation for drifting feed device.
( 2) Installation of floating feed maker control box.
In order to help with the operation, the installation setting of the on-site control box need to be selected near the bypass, as well as a specific space must be reserved in between the bypass and the control box to temporarily position the wastes flowing from the bypass.
The range between the frequency converter of the reducing motor and also the rotating positioner of the on-site cutter must not be as well far. It is regulated by voltage. If the range is also far, it will cause voltage variations as well as impact the cutting result.
The flowing temperature display tool on the on-site control box is to show the temperature of each end of the blowing cavity in real time, and the displayed temperature series has specific needs. Section 2 Growth cavity ... until the material discharge growth dental caries, this sequence requires to be taken notice of when wiring the electric control.
Additionally, there are 4 nozzles on the water inlet pipe of the dual-shaft differential conditioner of floating feed machine. They manage the opening of each nozzle with the electromagnetic cut-off valve.
The floating feed machine conditioner inlet nozzle switches over 1 to 4 on the control box correspond to the conditioners The first nozzle to the 4th nozzle from the feed end.
For details please contact: Richi Machinery
WhatsApp：86 138 3838 9622
Email：enquiry@richipelletmachine.com
Comments
Post a Comment