Why should poultry feed processing machine lubed?

 Chicken feed processing  equipment  producers all  recognize that  throughout the operation of the feed  equipment, there will be  equivalent  rubbing between the parts  touching each other, from  damages to the  components to  impacting the production of mechanical  devices,  hence causing the mechanical  devices to  fall short  as well as causing huge  financial losses to the  venture.  Consequently,  normal lubrication is usually  called for to ensure the  typical  procedure of the  pet feed pellet making  device.

Related post: poultry feed plant

When  oiling feed  equipment, poultry feed processing machine  suppliers usually  consist of  numerous different lubrication states, which can be  split  right into boundary  rubbing, dry friction  as well as liquid  rubbing.  Normally  talking,  lubing the  rubbing parts of  devices can  properly reduce friction,  substantially reduce  devices wear  and also performance  intake,  boost equipment operating efficiency,  as well as  extend  tools life. As one of the  primary means to  boost equipment  efficiency, lubrication  innovation  has actually  ended up being a  usual  worry in  associated  areas.

 Chicken feed processing  equipment  makers  require to  take note that in the process of lubrication, they  need to not be blindly carried out, but  must  create a lubrication management plan  according to the  growth of the  venture according to the actual production  scenario of the  chicken feed  equipment itself, so  regarding make  higher  initiatives for the normal operation of the  business  tools. contribution.Why should the  chicken feed pellet making  maker be kept  lubed?

Related post: https://www.pellet-richi.com/feed-pellet-machine/poulty-feed-pellet-production-line.html

 Generally, the  significance of lubricating  treatment  has actually been emphasized  over and over,  mostly  due to the fact that  appropriate lubricating  treatment can significantly  lower the wear  degree of feed pellet mills and ensure smooth production  job. As we all  understand, any  fowl feed  handling  device will inevitably have  issues such as  lowered  versatility, decreased operating efficiency  and also  damages after  long-lasting  usage.  Right now, the  upkeep of  tools  certainly  loses labor  as well as material  source costs,  as well as  triggers enterprises to  endure  better  financial losses.

Poultry feed processing  equipments are no  exemption. In the  lasting  usage  procedure, if there is a lack of  matching lubrication, the  rubbing  toughness  in between the  call  components will  undoubtedly increase, resulting in damage to the  components  and also  influencing the normal  use the entire  fowl feed processing  device.  For that reason, having a  excellent lubrication program  in position before a  trouble  takes place in the  devices  will certainly be a preventive measure to prolong the life of the  devices.

Related post: 3-5t/h chicken feed mill in Zimbabwe 

The Followings Are More Frequently Asked Questions about Poultry Feed Pellet Machines ：

With the opening of 2022, the sales of Richi  Equipment's  chicken feed  handling machines  have actually been  increasing  continuously.  Nonetheless, for the  tiny problems  triggered by the  incorrect  procedure of customers, a brief  recap is as  adheres to:

1. What should I do if the  chicken feed processing  device can not be pressed?

 Experiencing this  trouble,  numerous  good friends will  most definitely  assume that this  circumstance  will certainly  additionally  take place when their feed pellet  makers are  creating feed pellets. This is really a headache, not only wasting raw materials, but  additionally  substantially increasing the  problem of  evaluating feed pellets. Today, a technologist will  review the  factors for this phenomenon with you.

Related post: 10-15T/H Animal Feed Factory in Uzbekistan

Recently,  several  clients reported that the  chicken pellet  equipment produced a  great deal of powder,  and also the pellets were not  limited  sufficient, the feed pellets were  constantly soft, so what  taken place?

 Generally, is this considered a feed  active ingredient or formula?  Fairly slow  manufacturing  modifications, or  adjustments to  dishes, can quickly  accomplish the desired results.  Leaving out feed  active ingredients and  formulas, we  will certainly  assess the  maker  arrangement for  interior  troubles.

( 1) The  mold and mildew wear is  also  huge, the sieve holes are flattened,  as well as the  growth is serious,  causing a  reduction in pellet  stress, affecting the pellet  developing rate,  and also causing too much powder.

( 2) The  wetness  material of the raw  product is  also low or  too expensive. If the water  material is  too expensive, the powder  will certainly not be too much, but the pellet hardness is  reduced,  as well as the pellets of the  chicken feed pelleting  system are  simple to loosen. The raw material has a  low tide  material and is  hard to  squeeze out, resulting in too much powder.

( 3) The  fowl feed pellet machine is aging, the power  wants, the motor can not  supply  adequate speed,  and also the  equivalent pressure is  created to  push into pellets.

Related post: Tanzania 1-2t/h poultry feed mill

( 4) The quality of the ring die is not good, or the compression is not  expensive.

( 5)  Take into consideration using  oil.

( 6) The feeding scraper is not  mounted correctly,  as well as the feeding can not enter  journalism chamber.

( 7) The position of the cutter is wrong, and the discharge material is squeezed  right into powder (but if the hole is often  obstructed, it is unlikely).

( 8)  Wetness control refers to the comprehensive control of  different  variables according to different situations in the whole  manufacturing process,  to ensure that the  last water  material of the  item can  get to the expected target of the  manufacturer. The  major  elements affecting the final water content of feed products are: water  material of feed  active ingredients, water changes in the  squashing stage, liquid addition in the mixing  phase,  vapor water  material, conditioning level, die  opening  dimension  and also  density, cooler air  quantity  as well as air-drying time,  product packaging.

The  impact of  high quality  administration  and also different climatic  as well as  ecological factors (generally, the moisture  web content of pellet feed after processing  will not  surpass 12.5;  yet in the north, pellet feed shall not  surpass 13.5. If processing in summer, due to the high ambient  temperature level, the optimum  wetness content of finished pellets  will not  go beyond 13.5. 12.5, otherwise it is  simple to  mold and mildew  and also  weaken).

Related post: poultry feed pellet making machine

Feed pellets are welcomed by  increasingly more farmers  as well as herdsmen with their  special  benefits. It is  simple to store  as well as  transportation, and it is also good for animal digestion.  Compared to  common feed, it is  abundant in nutrients  as well as has a good market prospect.  Actually, the production  procedure of feed pellets is a  procedure of distribution  proportion, as long as you  understand the  proportion.  Naturally, when the pellets  begin,  naturally  inexperienced,  yet do it  two times. The  basic  chicken feed processing machine  maker's manual will  discuss the distribution  proportion of feed pellets, which can be  described.

2. No pellets.

（ 1 ） Reason.

The new  chicken feed processing  device was not run-in with  lubing oil or was not run-in  sufficient;.

The  dampness content of feed raw materials is  expensive;.

（ 2 ） Solution.

 Get rid of the raw materials in the current poultry feed processing  equipment,  and also  include oil to the raw  products to run in the new machine,  and also the  proportion of each time is: 1:3.

 Include some  completely dry ingredients to  readjust the  dampness.

Related post: 

3. The  electric motor  quits suddenly.

（ 1 ） Reason.

The voltage is  also  reduced.

The  stress between  journalism roller and the die plate is too high.

（ 2 ）  Remedy.

 Usage 4mm  cable to  stay clear of  stumbling during use.

 Loosen up some screws.

For details please contact: Richi Machinery 

WhatsApp：86 138 3838 9622

Email：enquiry@pellet-richi.com